Latest

MERCURY 450 HP RACING DECALS CUSTOM - ORANGE SILVER AND BLACK

MERCURY 450 HP RACING DECALS CUSTOM- 1 Set (2 sides)- High quality long lasting marine quality decal..

$195.00

Mercury 400HP 5.7L V10 Verado Racing & Up

MERCURY 400 HP RACING DECALS - 1 Set (2 sides)- High quality long lasting marin..

$225.00

Featured

World Cat Logo Decals

World Cat logo Decal.- World Cat decal. - Includes 2 Decals full color.- Each decal measures ap..

$195.00

Rear Window Graphic Marlin

All rear window graphics are made from “OEM” grade perforated vinyl film that shows the image on the..

$67.00

Honda 225HP Decal Kit

Honda 225HP four stroke Decal Kit - Fits years 2000 - Present- 1 Set (2 sid..

$94.00

Aquasport Boat Logo Decals 36"x19"

Aquasport Boat Logo Decals 36"x19" (2 colors) Teal and Black - 1 Set (2 s..

$120.00

Baja Boat Logo Graphic Decals

Baja Graphic Boat Logo Decals aprox. 28.5' x32" White and Black (2 colors) - 1 ..

$290.00

Rear Windows Graphics Tiger Attack

All rear window graphics are made from “OEM” grade perforated vinyl film that shows the image on the..

$67.00

DONZI Hulls side Logo Decal 12" H x 58" W

DONZI Hulls side Logo Decal Set 12" H Red, Black , 1 Set (2 sides) 12" x 58"- 2 DONZI Nam..

$135.00

Rear Window Graphic Run horses 5

All rear window graphics are made from “OEM” grade perforated vinyl film that shows the image on the..

$80.00

- Removable and repositionable
- Peel and stick for easy installation
- Can be displayed indoor or outdoor
- High resolution photos or textures

Substrate
Description	Photo-tex Adhesive Fabric High quality adhesive fabric made by Photo-tex®. Suitable for indoor and outdoor applications. Popular uses include wall, floor and general sticker graphics. CLEAN IT - BEFORE - YOU STICK IT Use a warm, damp cloth or sponge to clean the wall surface or window and allow it to completely dry. (This suggestion is for existing walls with probable fingerprints and dirt resulting from day to day foot traffic and use). Make sure all previous cleaning solutions are completely gone. Outdoors we suggest you use a pump spray to save time. You can remove and replace the wall decal multiple times; however, once the adhesive collects too much dust, dirt or fibers it will become less effective and Wall Decals may not stick as well to your surface. PEEL & STICK IT Depending on the size of your wall decal, it may be helpful to have two people install it. Try not to let the adhesive come together, or let wall decal fold up against itself. It’s okay if it does, you can separate it by carefully pulling it apart and you may want two people to do this on larger images. Start at the top of your wall decal Image and pull down approximately 4-6” of the backer and crease the back of the backer. Simply apply the 4-6” of exposed adhesive area to your chosen location. It can be repositioned many times. Once your square then continue to slowly pull the backer downward in 4-6” increments, smoothing the wall decal as you go. Depending on the size, it may be helpful if one person pulls down the backer, while the other smooth’s the image on the surface. You can use a plastic dry wall knife (like 6”-8”) to smooth out. If there are any bubbles or wrinkles, you can lightly press or smooth them out, or just peel back that area and re-apply. Please Note: Pressing too hard will not damage the wall decal; however, it may cause your hands to gather ink (Eco-Solvents inks mainly) (due to the natural oils on your hands), and could transfer from your hands onto another surface. SUGGESTIONS If a bubble re-appears over the next day or two, pressing and lightly rubbing can remove it. This can happen occasionally if oil, dirt, or dust is on your surface. Use a sewing pin to pop the bubble, and then smooth it out with your fingers in a circular motion. In the very rare instance that bubbles keep re-appearing, you may want to move your wall decal to another area as there is something preventing the adhesive to stick. Most causes of bubbles are because the wall was painted within the last 30 days or cleaning chemicals where used prior. OUTDOORS You can place your wall decal on any outdoor, flat surface; however, it may fade after several months of strong sun exposure or rain. The material will stay in place on a vehicle for a long time, but repeated car washes will eventually wear it out. To ensure your wall decal stays on a moving surface, it is very important to avoid air gaps during application. Simply use the back of a spoon to smooth it tightly into cracks and around bends. For your safety do not place wall decal on CAR windows.

Substrate

Description

Photo-tex Adhesive Fabric High quality adhesive fabric made by Photo-tex®. Suitable for indoor and outdoor applications. Popular uses include wall, floor and general sticker graphics. CLEAN IT - BEFORE - YOU STICK IT Use a warm, damp cloth or sponge to clean the wall surface or window and allow it to completely dry. (This suggestion is for existing walls with probable fingerprints and dirt resulting from day to day foot traffic and use). Make sure all previous cleaning solutions are completely gone. Outdoors we suggest you use a pump spray to save time. You can remove and replace the wall decal multiple times; however, once the adhesive collects too much dust, dirt or fibers it will become less effective and Wall Decals may not stick as well to your surface. PEEL & STICK IT Depending on the size of your wall decal, it may be helpful to have two people install it. Try not to let the adhesive come together, or let wall decal fold up against itself. It’s okay if it does, you can separate it by carefully pulling it apart and you may want two people to do this on larger images. Start at the top of your wall decal Image and pull down approximately 4-6” of the backer and crease the back of the backer. Simply apply the 4-6” of exposed adhesive area to your chosen location. It can be repositioned many times. Once your square then continue to slowly pull the backer downward in 4-6” increments, smoothing the wall decal as you go. Depending on the size, it may be helpful if one person pulls down the backer, while the other smooth’s the image on the surface. You can use a plastic dry wall knife (like 6”-8”) to smooth out. If there are any bubbles or wrinkles, you can lightly press or smooth them out, or just peel back that area and re-apply. Please Note: Pressing too hard will not damage the wall decal; however, it may cause your hands to gather ink (Eco-Solvents inks mainly) (due to the natural oils on your hands), and could transfer from your hands onto another surface. SUGGESTIONS If a bubble re-appears over the next day or two, pressing and lightly rubbing can remove it. This can happen occasionally if oil, dirt, or dust is on your surface. Use a sewing pin to pop the bubble, and then smooth it out with your fingers in a circular motion. In the very rare instance that bubbles keep re-appearing, you may want to move your wall decal to another area as there is something preventing the adhesive to stick. Most causes of bubbles are because the wall was painted within the last 30 days or cleaning chemicals where used prior. OUTDOORS You can place your wall decal on any outdoor, flat surface; however, it may fade after several months of strong sun exposure or rain. The material will stay in place on a vehicle for a long time, but repeated car washes will eventually wear it out. To ensure your wall decal stays on a moving surface, it is very important to avoid air gaps during application. Simply use the back of a spoon to smooth it tightly into cracks and around bends. For your safety do not place wall decal on CAR windows.